Page 3
Important! This appliance is not intended to be used or cleaned by persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given instructions concerning the safe use of the appliance by a person legally responsible for their safety.
Page 5
50°C 0°C 100 % Defective battery or improper contact. Contact service agent for support. contact?
Page 6
A combined total of 7 Amps (1680 Watts) is available through the use of these outlets. If the power drawn through the pass-through outlets exceeds 7 Amps (1680 Watts), the circuit breaker on the charger will trip. Reduce the amount of power being used by unplugging one of the devices or plugging in a different device, then press the circuit breaker to reset.
TECHNICAL DATA CHARGER Model BL18DP-LE and BL18DP-X5 Input 220 - 240 V 50 Hz 2000 W Output 6.0 A (Port A), 6.0A (Port B) Quick charge current Li-Ion 6A max USB battery charging output 2.0 A Maximum output at pass-through outlets (total)
Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the The quick charger is intended to charge AEG system slide 18V process has to be accompanied by corresponding experts. batteries. The quick charger can also charge USB capable When transporting batteries: devices rated up to 2 Amp.
Page 9
the label and order the drawing at your local service agents or directly at: Techtronic Industries (Australia) Pty. Ltd. PO Box 1065 Mount Waverley VIC 3149 Tel. no. 1300 361 505 Australia Techtronic Industries N.Z. Ltd. PO Box 12-806 Penrose AUCKLAND 1642 Tel no.
Need help?
Do you have a question about the BL18DP-LE and is the answer not in the manual?
Questions and answers