Advertisement
SCANNING
06
AND PRINTING
Scanning
With SP500X mounted on hand,
aim the scanner laser at the
barcode you wish to scan.
SP500X should be positioned 5-10
inches away from the
desired barcode, at a twenty
degree angle.
When a valid barcode is scanned,
the SP500X will sound an
acceptance tone, indicating that
the device is ready to print.
[ [
Note: If the scanner goes off, press the
back button to turn the scanner back on.
Warning: Do No Stare Into Beam, Class 2 Laser Product.
Printing
When printing, the SP500X front end
should remain level with the print
surface until print is completed.
5 - 10
Inches
Do not tilt the printer forward
or backwards while printing.
20
Angle
Advertisement
