Advertisement
POWERING
01
ON THE SP500X
Tip: To put the SP500X into "Sleep Mode", press and hold the
green power button for ten (10) seconds.
01. Install the battery by sliding it into
the open slot on the SP500X. The
curved side of the battery should
align with the bottom of the SP500X.
02. Click the battery into place.
The SP500X will power on.
Tip: To power off the SP500X, remove
the battery by squeezing the two
latches towards one another, and
pulling the battery out of the SP500X.
The internal backup battery will keep
the SP500X on for up to thirty (30)
seconds. When the backup battery is
exhausted, the SP500X will power off.
Advertisement
