Motorola UbiSurf SM56 At Commands Reference Manual page 36

Table 12– errorControl Active from 3.5.2/V.58
Table 13– compressionActive from 3.2.2/V.58
Table 14– callCleared codes from 3.6.4/V.58-1994
-34
Value Value
Value Value
2 V.42 Alterative protocol (MNP™)
3-7F Reserved (V.58)
80 MNP10™
81 ECP™ Enhanced Cellular Protocol
82 ETC™ Enhanced Throughput Cellular
82-FF Reserved for mfgs
Value Value Value Value
0 None
1 V.42bis
2-7F Reserved (V.58)
80 MNP5™
81-FF Reserved for mfgs
Indicates that the DCE has gone on hook and that the previously existing
network connection has been cleared. These values are hex.
Value Value Value Value Description Description Description Description
0 CauseUnidentified
1 No Previous call
2 Call is still in progress
3 Call Waiting signal
detected
4 Delayed
A NMSinitiatedDialCall
B NMSinitiatedLeased-
LineRestoral
C NMSinitiatedRedial
D NMSinitiatedDialDis-
connect
14 PowerLoss
15 EquipmentFailure
Motorola Confidential Proprietary
Description Description
Description Description
Description Description Description Description
Notes Notes Notes Notes
Call setup issues
Not in V.58
Not in V.58
Not in V.58, only if modem can detect it
Same as value 2A, CallAttemptsLimitEx-
ceeded
-- Network Management System
DCE