Motorola UbiSurf SM56 At Commands Reference Manual page 33

Table 6- AT#UD Last Call Status Report Format
Table 7- Call Setup Result Codes
Key Key Value Value
Key Key Value Value
52 0-
FFFFFFFF
53 0-
FFFFFFFF
54 0-FFFF
55 0-FFFF
56 0-
FFFFFFFF
57 0-
FFFFFFFF
58 0-FFFF
59 0-FFFF
5A-5F
60 See Table 9 Termination Cause
62-7F
80-FF
Definition Definition
Definition Definition
Code Code Code Code
0 No previous call (modem log has been cleared since any previous
calls)
1 No dial tone detected
2 Reorder signal detected, network busy
3 Busy signal detected
4 No recognized signal detected (e.g. no signal, or nothing recog-
nizable)
5 Voice detected * if this is a voice modem (e.g. V.253) operating in
voice mode (e.g. +FCLASS=8.0)
6 Text telephone signal detected (see V.18)
7 Data Answering signal detected (e.g. V.25 ANS, V.8 ANSam)
8 Data Calling signal detected (e.g. V.25 CT, V.8 CI)
9 Fax Answering signal detected (e.g. T.30 CED, DIS)
A Fax Calling signal detected (e.g. T.30 CNG)
Motorola Confidential Proprietary
Definition Definition
Definition Definition
Transmit characters sent from DTE
Received characters sent to DTE
Transmit characters lost (data overrun errors from
DTE)
Received characters lost (data overrun errors to
DTE)
Transmit I- Frame count, if error control protocol
running
Received I-Frame count, if error control protocol
running
Transmit I-Frame error count, if error control proto-
col running
Received I- Frame error count, if error control proto-
col running
Reserved
Reserved for future versions of this specification
Reserved for manufacturer proprietary keys
-31