Troubleshooting - Black & Decker BDH1725SM Instruction Manual

Steam mop
Table of Contents

Advertisement

Recommended accessories for use with your appliance are available from your local
dealer or authorized service center.
WARNING:
appliance could be hazardous.
PROBLEM
• Unit will not start.
• Mop will not make steam. • No water in water tank.
• Mop leaves water on floor. • Cleaning pad is too wet. • Unplug unit from power outlet
• Mop left spot on floor.
ACCESSORIES
The use of any accessory not recommended for use with this

TROUBLESHOOTING

POSSIBLE CAUSE
• Cord not plugged in.
• Main switch not on.
• Floor head not correctly
fitted.
• Circuit fuse is blown.
• Circuit breaker is tripped. • Reset circuit breaker. (If the
• Cord or switch is
damaged.
• Tank not fitted correctly. • Ensure tank is fully attached and
• Mop left in one spot too
long.
• Hard water.
POSSIBLE SOLUTION
• Plug appliance into a working
outlet.
• Turn main switch on.
• Ensure floor head is correctly
attached.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a BLACK+DECKER
service center or authorized
servicer.)
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
BLACK+DECKER service center or
authorized servicer.)
• Have cord or switch replaced
at a BLACK+DECKER Service
Center or Authorized Servicer.
• Add water to the water tank.
seated.
and change the micro-fiber
cleaning pad.
• Never leave the steam mop on
the floor with a damp or wet
cleaning pad still attached when
not in use.
• Use distilled water.
8

Advertisement

Table of Contents
loading

Table of Contents