Table of Contents
Advertisement
Step 5
Open SkyIPCam Utility by double clicking its icon on the desktop,
or clicking Start, then go to (All) Programs > Airlink101 SkyIPCam UltraView > SkyIPCam
Utility.
Step 6
Click on Search to find the camera(s) on your network. Select the camera you wish to configure
and click on Change IP.
Note
If the Camera you wish to configure does not show up in the utility, make sure the camera is
properly connected to the same local network as your computer is, and the Green LED should be on.
Click on Search to try again.
- 10 -
Advertisement
Table of Contents
