Gree G17-10ESHWAC-CA Owner's Manual page 10

INSTALLATION INSTRUCTIONS
9
Foam Top Gasket (Without Adhesive)
Insert the Foam Top Gasket between the glass
and the window to prevent air from getting into
the room. If the strip does not properly fit to your
window, obtain appropriate material at a local store
to provide a proper seal.
11
Width
Locate the Foam Insulation from the packaging.
Cut the insulation into a rectangular shape to
match the width as measured in figure 10.
NOTICE:
This picture is for reference only. Please refer to the actual product for the appearance.
10
Width
After finishing installation, measure the width between
the outer case of the air conditioner and the window
frame (see Figure 10, length).
12
Remove adhesive from back of Foam Insulation.
Stick the installation evenly on the flexible screen.
Cover the flexible screen completely.
10
Width