Table of Contents
Advertisement
Step 3
With another network cable, connect one end of the cable to your
computer's Ethernet port and connect the other end to one of the LAN ports
of the router. (After setup finishes, you can remove the network cable
between the computer and router if you want to use wireless connection.)
Step 4
Plug the power adapter to the router and connect it to an electrical
outlet. Make sure the power switch at the back is "On".
4
Step 5
Power on your computer.
Step 6
Check LEDs of the router: make sure Status, WAN, Wireless, and
the LAN port that the computer is connected to are lit. If one or more LEDs
are not lit, please refer to Section 4 Troubleshooting.
Step 7
Insert the Setup CD into CD-ROM drive.
Step 8
When the autorun menu pops up, click EZ Setup Wizard.
5
Advertisement
Table of Contents
