Set Up Nvidia Graphics Cards; Set Up Ati Graphics Cards - Lenovo ThinkCentre M600t User Manual

• This section only applies to graphics cards with a multi-display output function. If the computer you
purchased does not come with a graphics card that supports this function, you can skip this section.
• The interface images used in this section are for reference only.
• This section only introduces some common graphics card functions. For information about other
functions, see the electronic help information that comes with the graphics card driver.
• If you need to use dual-screen mode or expanded display mode, please connect another function display
device to the computer's output port.
The graphics card setup instructions below assume you are using Windows 10.

Set Up NVIDIA Graphics Cards

Display settings
Right-click on a blank space on the desktop. In the menu that appears, select "Display settings" to go to the
Display interface. In the "Display resolution" field, you can adjust the resolution. In the "Multiple displays"
section, you can configure multiple displays to copy or expand your display (this function is only available
after you connect two monitors). Click "Advanced display settings" and go to the "Monitor" tab for a display
to adjust the screen refresh rate.
Multiple display output settings
If your graphics card hard two or more output ports, it can output to multiple displays. This function supports
single display mode, copy mode, and dual-screen display mode.
Before setup, connect the two displays for output.
This section assumes you are using the Windows 10 operating system. Right-click on a blank space on the
desktop. In the menu that appears, select "Display settings" to go to the Display interface. In the "Multiple
displays" section, you can configure multiple displays. The drop-down menu provides four options: copy this
display, expand this display, only display on 1, and only display on 2.
Note: If the TV display interface is not clear, try adjusting the screen resolution to 800 x 600 pixels.

Set Up ATI Graphics Cards

Display settings
This section assumes you are using the Windows 10 operating system. Right-click on a blank space on the
desktop. In the menu that appears, select "Display settings" to go to the Display interface. In the "Display
resolution" field, you can adjust the resolution. In the "Multiple displays" section, you can configure multiple
displays to copy or expand your display (this function is only available after you connect two monitors). Click
"Advanced display settings" and go to the "Monitor" tab for a display to adjust the screen refresh rate.
Multiple display output settings
If your graphics card hard two or more output ports, it can output to multiple displays.
Before setup, connect the two displays for output.
This section assumes you are using the Windows 10 operating system. Right-click on a blank space on the
desktop. In the menu that appears, select "Display settings" to go to the Display interface. In the "Multiple
displays" section, you can configure multiple displays. The drop-down menu provides four options: copy this
display, expand this display, only display on 1, and only display on 2.
.
Chapter 3 Set Up Your Computer
11