Ranger design 1525-NL Installation Manual page 14

1.2.10 Loosen the pre-assembled hardware on the ladder clamp hasps, slide the hasps on the ski to the
position shown below, and tighten the nuts.
THIRD CROSSBOW
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q 1/2" Socket
q Tape Measure
q Marker
HARDWARE USED
4×
-
hardware is pre assembled
#90-487 Carriage Bolt 5/16" × 3/4"
#98-117 Flat Washer
#98-123 Lock Washer
#94-105 Hex Nut
1525-NL Installation Guide | REV. C2 | Page 14
.