5
Select Setup Defaults, on the bottom of the window, by pressing F9,
then press Enter.
6
Select Save and Exit by pressing F10, then press Enter. The message
"Save Configuration changes and exit now?" appears.
7
Select Yes, and then press Enter. The notebook restarts.
✍
If this occurs on a regular basis, contact Sony Computing Support
(http://www.sony.com/pcsupport/).
My notebook starts, but the message "Operating system not
found" appears, and Windows does not start.
❑
Make sure there is no floppy disk in the floppy disk drive and no bootable
optical disc in the optical disc drive.
❑
If a non-bootable floppy disk is in a connected drive, follow these steps:
1
Turn off the notebook, and remove the floppy disk.
2
Restart the notebook, and confirm that Windows starts properly.
❑
If Windows still does not start, follow these steps to start the BIOS:
1
Turn off the notebook.
2
Remove any peripheral devices connected to the notebook.
3
Turn the notebook on again.
4
Press F2 when the Sony logo appears. The BIOS setup menu screen
appears.
5
Press the arrow keys to select the Exit menu.
6
Press the arrow keys to select "Get Default Values," then press Enter.
The message "Load default values for all SETUP items." appears.
7
Select Yes, and then press Enter.
8
Use the directional arrow keys to select "Safe and Exit," and then press
Enter. The message "Save configuration changes and exit now?"
appears.
9
Select Yes, and then press Enter. The notebook restarts.
Troubleshooting Your Notebook
91
Need help?
Do you have a question about the PCG-FXA47 VAIO User Guide (primary manual) and is the answer not in the manual?
Questions and answers