Troubleshooting I.link Devices; I Cannot Establish A Connection Between Two Vaio Computers When Using An I.link Cable - Sony PCG-FXA47 VAIO User Guide (primary manual) User Manual

Change text in this variable definition to document title.

Troubleshooting i.LINK devices

I cannot establish a connection between two VAIO computers
when using an i.LINK cable.
1 Disconnect the i.LINK®
2 Wait for the computers to respond. If neither computer responds after a few
moments, restart both computers.
✍
The computers may not recognize an i.LINK connection after returning from a power
saving mode (Standby or Hibernate). If that happens, restart the computers to
establish a connection.
* i.LINK is a Sony trademark used only to designate that a product contains an IEEE 1394 con-
nection. The i.LINK connection may vary, depending on the software applications, operating
system, and compatible i.LINK devices. All products with an i.LINK connection may not
communicate with each other. Refer to the documentation that came with your compatible
i.LINK device for information on operating conditions and proper connection. Before con-
necting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk
drive, confirm their operating system compatibility and required operating conditions.
104
*
cable from both computers and reconnect it.