✍
Do not push the eject button when the LED indicator is turned on. Otherwise, data
may be lost.
To remove the floppy disk drive
1
Turn off the notebook.
2
There is a RELEASE lever on the bottom of the computer. Slide this lever in
the direction of the arrow.
Multipurpose bay release lever
3
Slide the drive out of the multipurpose bay.
4
Insert the weight saver. See "Using the Weight Saver" for details.
To reinsert the floppy disk drive
1
Turn off the notebook.
2
If another device is in the multipurpose bay, remove the device. See "To
remove the second battery pack" for details.
3
Insert the floppy disk drive, with the VAIO label facing up, into the
multipurpose bay until the RELEASE lever locks into place.
Using the Floppy Disk Drive
19
Need help?
Do you have a question about the PCG-FXA47 VAIO User Guide (primary manual) and is the answer not in the manual?