Table of Contents
Advertisement
Appendix
Updating DC 40 Software
The DC 40 uses your Astro as
a wireless transfer device when
transferring software updates and
detailed dog tracks.
1. Install Garmin MapSource Trip
and Waypoint Manager. Follow
the instructions for installation
and operation provided with the
software.
2. Connect the Astro to a computer
using the USB cable provided.
Turn the Astro on.
3. Turn the DC 40 on and place it
within 12 inches of the Astro.
4. Go to
www.garmin.com/products/
Astro. Click on Updates &
Downloads.
5. Open the Dog Information page
(page
7) on the Astro.
6. Press MENU > Upgrade Dog Unit
and follow on-screen instructions.
0
7. Follow the instructions for using
WebUpdater or click Download
(located under Unit Software) and
follow the instructions. (If Unit
Software is not listed on the Web
site, there are no updates.)
Transferring Tracks from the
Astro to MapSource on Your
Computer
To transfer tracks:
1. Open Garmin MapSource Trip
and Waypoint Manager. Select the
Tracks tab on the left side of the
MapSource page.
2. Click Receive from Device from
the Transfer menu.
Transferring More-Detailed
Dog Tracks from a DC 40 to
MapSource
The dog tracks saved on your Astro
are detailed enough for most users to
view the movements of their dog. The
DC 40 does, however, store more-
Astro and DC 40 Owner's Manual
Advertisement
Table of Contents
