Roland R-4 Pro Version Check And Update Process

Hide thumbs Also See for R-4 Pro:

Version Check and Update Process:

R-4 Pro

Please read these instructions fully and carry out the update process carefully, as described.

NOTE: Failure to carry out the update procedure properly can result in product failure.

Things to Prepare

The following are necessary to carry out the update process:

- R-4 Pro Unit

- A computer with a USB port

- R-4 Pro System Update file (MAIN.BIN)

1. Plug AC adapter into R-4 ProDC In jack.

NOTE: Do not attempt Version Check or System Update on battery power!

2. Press and hold [DISPLAY] and [MARK] buttons while powering up the unit.

Table of Contents

Do you have a question about the R-4 Pro and is the answer not in the manual?

Page 1 The following are necessary to carry out the update process: - R-4 Pro Unit - A computer with a USB port - R-4 Pro System Update file (MAIN.BIN) Checking the version number 1. Plug AC adapter into R-4 ProDC In jack.
Page 2 - Download the R-4 Pro System Update file from our website to your computer: http://www.rolandsystemsgroup.com. - Visit the R-4 Pro product page, then follow the download link to the R-4 Pro System Update file. Agree to the EULA and download the System Software file.
Page 3 R-4 Pro drive. (see below): The root directory is the top level directory of your R-4 Pro drive. It is designated with a drive letter such as D:\, E:\, F:\, etc. Do not put the update file inside any of the folders.
Page 4 NO FILE!! The R-4 Pro cannot see the MAIN.BIN file on its hard drive. Re-connect the R-4 Pro to your computer via USB and confirm that the MAIN.BIN file copied into the root directory of the R- 4 Pro hard drive.