Synology SA3200D at a Glance
No.
Article Name
Power Button and
1
Indicator
2
HA Status Indicator
3
Alert Indicator
4
Beep Off Button
5
Drive Status Indicator
6
Drive Tray
7
Rail Kit Release Tab
1
For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.
4 Chapter 1: Before You Start
Location
1. Press to power on your Synology NAS.
2. To power off the Synology NAS, press and hold until you hear
a beep sound and the Power LED starts blinking.
Displays the status of the HA (High Availability). For more
information, see "LED Indicator Table."
Displays warnings regarding fan or temperature. For more
information, see "LED Indicator Table."
Front
Press to deactivate the beeping sound that is emitted when a
malfunction occurs.
Displays the status of drives. For more information, see "LED
Indicator Table."
Install drives (hard disk drives or solid state drives) here.
Push in and hold to release the Synology NAS from the rail kit
lock.
1
Description