Table of Contents
Advertisement
3
Chapter
System Maintenance
Replace System Fan
If a system fan malfunctions, please see the instructions below to replace the malfunctioning fan of SA3200D.
1 Follow step 1 and 2 of the To install the RAM module section to shut down your SA3200D, disconnect the
cables and pull out one controller.
2 Fans are numbered on rear top cover of the controller, as indicated below.
3 Find the malfunctioning fan. Lift the fan upward to remove it.
4 Prepare a new fan, and slide it into the controller. Make sure the fan is properly slide in.
23 Chapter 3: System Maintenance
Advertisement
Table of Contents
