Table of Contents
Advertisement
Initialize DSM on Synology NAS
After hardware setup is finished, please initialize DiskStation Manager (DSM) – Synology's browser-based
operating system – on your SA3200D.
Initialize DSM with Web Assistant
Your SA3200D comes with a built-in tool called
DSM from the Internet and install it on your SA3200D. To use Web Assistant, please follow the steps below.
1 Power on your SA3200D.
2 Open a web browser on a computer connected to the same network as the SA3200D.
3 Enter either of the following into the address bar of your browser:
a
find.synology.com
b
synologynas:5000
4 Web Assistant will be launched in your web browser. It will search for and find the Synology NAS within the
local network. The status of the SA3200D should be Ready.
5 Click
Connect
to start the setup process and follow the onscreen instructions.
Note:
1. The Synology NAS must be connected to the Internet to initialize DSM with Web Assistant
2. Suggested browsers: Chrome, Firefox.
3. Both the Synology NAS and the computer must be in the same local network.
6 If you accidentally leave the setup process before it is finished, log in to the DSM as admin (default
administrative account name) with the password left blank.
Learn More
Congratulations! Your SA3200D is now ready for action. For more information or online resources about your
SA3200D, please visit www.synology.com.
25
Web Assistant
that helps you download the latest version of
4
Chapter
Advertisement
Table of Contents
