Installation And Adjustment - TdA L200Y User Manual

L200Y SLIDING GATE OPERATOR USER'S MANUAL
can be moved manually.
The device is well lubricated and cooled by the cooling oil (#25 transformer oil), which fills the
whole device, including the stator, the rotator of the motor, the worm gear and the worm.
Output gear Worm gear
Pressure nut Mandrel Key
Gear clutch
Fig.3
The device is equipped with a thermal protector, the thermal protector will switch off the motor
automatically in case of temperature is higher than 95ºC and switch on the motor automatically
when the temperature is lower than 60±5ºC.

5. Installation and adjustment

The L200Y rack-driven gate operator operates by forcing a drive rack past a drive gear. The
entire configuration is shown in the diagram below.
Fig.4
5