Installing The Driver When Installing Netware; Netware 4.2 - Adaptec 39320D User Manual

Adaptec SCSI Card 39320D User's Guide for Floppy Disks (OEM)

Installing the Driver When Installing NetWare

To install the
adpu320.ham
the instructions below for the version of NetWare you are
installing.

NetWare 4.2

Follow these instructions only if you are installing NetWare 4.2 for
the first time:
1 Begin installation of NetWare 4.2 on your server as instructed in
your NetWare documentation.
2 When a screen appears that asks you to select a disk driver,
press Insert.
3 Insert the Ultra320 FMS driver floppy disk for NetWare into
your floppy disk drive.
4 Press F3 and type a:netware\v42_v50 as the path to the
driver for NetWare.
adpu320.ham
5 Select adpu320.ham and press Enter.
6 Select No not to save existing file, Yes to save existing file
.
cdrom.nlm
7 Select No not to save existing file, Yes to save existing file
.
nbi.nlm
8 Select No not to save existing file, Yes to save existing file
.
nwpa.nlm
9 Select No not to save existing file, Yes to save existing file
.
nwpaload.nlm
10 Select Save parameter and continue and press Enter.
11 To install additional adapters, follow the procedures from
Step 5.
12 When complete, select Continue the installation to complete
the installation.
7-2
driver when you install NetWare, follow