Create A Bootable Host Drive-Raid 1 Mirrored Array; Select Controller - Adaptec 2074700-R Manual

Quick Installation
3.2 Create a Bootable Host Drive—RAID 1 Mirrored
Array
ICP RAID Console (ICPCON) is the software tool used for creating host drives as well as
administering the RAID subsystem. This section describes how to create a bootable host
drive in a RAID 1 mirrored array configuration via the expansion ROM (XROM)
ICPCON. See
configuration.
1. Power on the computer.
2. Press <Crtl>+<g> when the ICP RAID BIOS message appears to load XROM
ICPCON.
3. Select the controller and press Enter. See
Figure 3-12. Select Controller
32
Section 3.3 for an example of a RAID 5 disk array with hot fix drive
Figure 3-12.
Software Installation and User's Guide