Table of Contents
Advertisement
Problem
The camera movement
mode (OFF, SEQ,
SORT, AUTOPAN,
PATROL, AUTOTRACK)
setting changes.
Camera position is
different from the
preset position setting.
Picture is different from
the position setting.
Upper part of the picture
is black when the
camera is in a horizontal
orientation.
Camera suddenly starts
to pan by itself.
It is hard to see images
with the camera when
there are raindrops on
the dome cover.
● Periodically check the power cord.
Power cord sheathing is
damaged.
Power cord becomes
hot during operation.
Power cord becomes
warm or hot when it is
bent or stretched during
use.
Cause and Recommended Action
• Check the self return function.
• Perform REFRESH from the special setup menu.
• Adjust the picture using the preset menu and a
scene file.
• This is caused by the camera's internal cover. It
does not indicate malfunction.
• If the cleaning function is turned on, this is normal
d oes not indi cat e ma lfun ct ion. Che ck th e
CLEANING settings.
• If the cleaning function is not turned on, this
symptom could be due to noise.
• The effectiveness of the rain wash coating may
have been reduced. Refer to "Cleaning this product
body" in "Precautions for use" and clean the dome
cover. If the situation does not improve contact your
dealer.
• The power cord is damaged. Continued use creates the risk of
electric shock and fire. Immediately unplug the power plug and
contact a qualified service person or system installer for servicing.
Reference Pages
Operating
Instructions
Operating
Instructions
Operating
Instructions
Operating
Instructions
Operating
Instructions
7, 10
8
25
Advertisement
Table of Contents
