Russell Hobbs Turbo Lite Ultra RHHS2201 Manual page 15

CLEANING AND CARE:
CLEANING THE FLOOR HEAD
Remove the brush head from the unit.
Using a flat head screwdriver or a small coin, rotate the lock on the
brush cover in an anti-clockwise direction (1)
Remove the brush cover and place to one side.
Slip the belt over the brush bar, remove the brush bar and pull away
any tangled hair or debris.
Check that there are no blockages in the brush head.
Replace the brush bar, ensuring that the belt is correctly positioned
over the teeth on the brush bar. Reinsert the brush cover and click in
to place.
Rotate the lock in a clockwise direction and check that it is secured in
to place (2)
Brush Bar
(1)
15
Brush
Cover
Brush Cover
Lock
(2)