Table of Contents
Advertisement
Server Power Control
The Server Power Control option allows you to perform a remote power on, power off, power cycle and reset
your server.
Performing a remote power control operation
On the Server Power Control page, select an option then click Perform Action.
Launch SOL
SOL allows you to launch the remote console by using Serial over LAN.
Click Launch SOL. Select the Baud rate from the pull-down menu as your SOL transfer rate. Make sure that
the Baud rate selected here matches the Baud Rate set in the BIOS.
Once you have selected the Baud rate, and press Start to start the session. You can also press Stop to stop
the SOL connection.
88
Chapter 12
Advertisement
Table of Contents
