ARMC2ConfigApp,
Advanced Tab
The Advanced tab allows you to force your ARMC/2 card's on-board NIC to a specific
MAC address.
The Advanced fields are explained below:
Field/ Button
Description
Current MAC
The Current MAC Address field displays your current ARMC/2 card's MAC address.
Address
New MAC Address
The New MAC Address field allows you to specify a new MAC address.
Apply Button
The Apply button allows you to set the ARMC/2 card with the MAC address that you
entered into the New MAC Address field.
Reset the card now
The Reset the card now button allows you to reset the ARMC/2 card's firmware.
Button
Exit Button
The Exit button allows you to log off the ARMC/2 Card Configuration.
Continued
Cont'd
Appendix D : Troubleshooting 119