Important Notes - Acer ARMC_2 User Manual

Important NOTES:

There are some NOTES for ARMC/2.
NOTE1.
This note applies to the Altos G520/G710/R710/R510 with Redhat Enterprise Linux 3.0
and Altos G520/R510 with Redhat 9.0. Because these server can not detect the virtual
device (keyboard/mouse/CDROM/Floppy) in Redhat Enterpeise Linux 3.0 and Redhat
Linux 9.0. These some methods can solve this issue.
Method 1.
. Disable the USB 2.0 controller in BIOS (only for G520, R510 and R710)
Method 2.
. Connect a external USB 1.1 hub to server, then connect the ARMC/2 USB
cable behind the USB 1.1 hub.
Method 3.
. Users can unplug and plug ARMC/2 USB cable then server can recognizes
virtual device in Linux. But if you shutdown or restart the server, you must unplug and plug
ARMC/2 USB cable again.
NOTE2.
For "Full Screen function key (Alt + F) issue if client computer OS is Linux:"
IF client computer OS is RH9.0 or RH Enterprise 3.0 Update 1, the function key
is no problem. But it is other Linux version; please use toolbar to control the
Full Screen mode.
NOTE3.
For "Use Mazilla browser of Linux OS on client computer to login ARMC/2 website"
IF client computer OS is Linux, please use the Mazilla browser version to 1.6 or later to login
ARMC/2 website.
NOTE4.
For "Must connect external power with ARMC/2."
IF ARMC/2 does not connect external power, it will bring about the system
cannot power on by pressing power button.
NOTE5.
"The host heartbeat function is ONLY supported under Windows OS."
Chapter Two : Installing Your ARMC/2 Card 3