Table of Contents
Advertisement
Step 8 Connect to the ARMC/2 from a Client System,
Step
Description
7
In this example, the ARMC/2 card's IP address is 172.16.2.243. Double left click on the IP address
to start managing the ARMC/2 card and write down its IP address. Left click on the Finish button
after ARMC2RMseek Locator discovers all ARMC/2 cards.
8
When prompted for the user name and password, enter the following:
Left click the OK button. After you successfully log into your ARMC/2 card, you are greeted with
the Welcome to ARMC/2 screen.
Note:
The default user name and password are in lower-case characters.
Note:
When you log in using the root user name and password, you have full administrative
powers. It is advised that once you log in, you change the root password. See the
Administrator Setup subsection under the ARMC/2 Configurations section of this chapter.
26
ARMC/2 User's Guide
Field
Default
User Name
root
Password
superuser
Continued
Advertisement
Table of Contents
