Table of Contents
Advertisement
70
Installing the system into the rack
Caution: To minimize the chances of injuries, make sure that two
or more people help in installing the server.
To install the system into a four-post rack
1
Confirm that the left and right inner rails have been correctly
identified.
2
Remove the inner rails from the mounting rails.
a
Extend the inner rail from the mounting rail until the rail release latch
clicks (1).
b
Press the release latch (2) and slip the inner rail out.
c
Do the same thing to the other mounting rail.
Caution: To avoid personal injury, care should be taken when
pressing the inner rail release latches and sliding the component
into the rack.
3 System upgrades
Advertisement
Table of Contents
Troubleshooting
