Table of Contents
Advertisement
Item
Description
C
Power button
D
Power LED
E
Hard Drive Activity LED
F
System Status LED
Control Button Functions
Item
Power/Sleep button
Reset button
ID button
NMI button
LED Indicator Status
Item
NIC 1 activity LED
NIC 2 activity LED
Power/Sleep LED
Hard disk drive status
LED
System Status LED
System Identification LED Solid blue indicates system identification is active
Chapter 1
Description
Toggles the system power on/off. Sleep button for ACPI-
compatible operating systems.
Reboots and initializes the system
Toggles the front panel ID LED and the base board ID LED on
and off. The baseboard LED is visible from the rear of the
chassis and allows you to locate the server from the rear of a
rack of systems.
Puts the server in a halt-state for diagnostic purposes.
Description
Continuous green light indicates a link between the system
and the network to which it is connected.
Blinking green light indicates network activity.
Continuous green light indicates the system has power applied
to it.
Blinking green indicates the system is in S1 sleep state.(see
Note)
No light iindicates the power is off/is ACPI S4 or S5 state.
Random blinking green light indicates hard disk drive activity
(SCSI or SATA).
No light indicates no hard disk drive activity.
Solid green indicates normal operation
Blinking green indicates degraded performance
Solid amber indicates a critical or non-critical condition
No light indicates POST is running or the sytem is off (see
Note 1)
No light indicates system identification is not activated
Item
Description
I
System Reset Button
J
USB connector
K
Recessed NMI Button (Tool Required)
L
VGA connector
9
Advertisement
Table of Contents
