Setting Up Using The Supplied Cd-Rom - Sony Vaio VGF-WA1 Operating Instructions Manual

 Setting up using the supplied CD-ROM

To connect the device to a computer other than a Sony VAIO computer (Windows Vista), you can use the
supplied CD-ROM.
This allows you to install and set up the necessary software.
Notes
Do not insert the Wireless Adapter into your computer until an instruction to do so appears on the Setup

screen.
Do not connect this device to your computer via the USB cable until an instruction to do so appears on the

Setup screen.
1
Close all applications that are running on your computer.
Check to see if the following conditions are met before you proceed to step 2. If these conditions
are not met, the installation may fail.
You are logged in as a user who has administrative privileges (Administrator).

You have also temporarily closed the antivirus software (because it uses large memory).

2
Insert the supplied CD-ROM into the CD drive of your computer.
The Setup automatically starts.
3
Perform setup following the instructions on the screen of your computer.
Be sure to read the precautions on the screen thoroughly.
3