Acer H7530D Service Manual page 30

4. Remove the Top IR Cap (as yellow arrow
point).
5. Tear off the black tape (as blue arrow
point).
6. Tear off the black mylar (as green arrow
point).
7. Unplug 1 connector (as purple square)
to disassemble the FPC cable.
8. Unscrew 4 screws (as red circle) to
disassemble the Keypad Board
and Keypads.
NOTE: Circuit boards > 10 cm² has been
highlighted with the yellow rectangle
as above image shows. Please
detach the Circuit boards and follow
local regulations for disposal.
Top IR Cap
Keypa Board
FPC Cable
H7530/H7530D
Keypas
Confidential 2-