Page 1
Acer Projector H7531D Series User's Guide...
Page 2
Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
Page 3
Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Page 4
To avoid damage of internal components and to prevent battery leakage, • do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment • which will probably cause unexpected short current or damage rotor devices, lamp.
Page 5
Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed •...
Page 6
Do not stand the projector on end vertically. It may cause the projector to • fall over, causing injury or damage. This product is capable of displaying inverted images for ceiling mount • installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.
Page 7
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org.
viii First thing first Usage notes • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Adjusting the Height of Projected Image How to optimize image size and distance How to get a preferred image size by adjusting distance and zoom User Controls Installation menu Acer Empowering Technology Onscreen Display (OSD) Menus Color Image Management Setting...
Page 10
Troubleshooting LED & Alarm Definition Listing Replacing the Lamp Ceiling Mount Installation Specifications Compatibility modes Regulations and safety notices...
Projector Overview Projector Outlook Front / upper side Description Ventilation (outlet) Focus ring Zoom lens Lens cap Remote control receiver Rear side VIDEO VIDEO Pb/Cb Pb/Cb Pr/Cr Pr/Cr Description Power socket USB connector YPbPr/YCbCr input connector Composite video input connector S-Video input connector PC analog signal/HDTV/component video input connector (VGA IN)
Off" section. Adjusts the image to compensate for distortion caused by tilting the projector (± 15 degrees). Changes the active source. Use to select items or make adjustments to your selection. Temp Indicator LED. Unique Acer functions: eView, eTimer, ePower Management.
To choose the desired aspect ratio (Auto/4:3/16:9/L.Box) ZOOM Zooms the projector display in or out. Empowering key Unique Acer functions: eView, eTimer, ePower Management. KEYSTONE Adjusts the image to compensate for distortion caused by tilting the projector (± 15 degrees).
Page 16
Icon Function COLOR Press "COLOR" to adjust the color temperature of image. Press "VGA" to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. COMPONENT Press "COMPONENT" to change source to Component video. This connection supports YPbPr (480p/576p/720p/1080p) and YCbCr (480i/576i/1080i).
Getting Started Connecting the Projector Video Output VIDEO VIDEO S-VIDEO S-VIDEO Pb/Cb Pb/Cb Pr/Cr Pr/Cr HDTV adapter R B G R B G R B G DVD player, Set-top Box, HDTV receiver Description Power cord USB cable VGA cable HDMI cable Audio cable jack/jack RS232 cable Note: To ensure the projector works well with your computer,...
Turning the Projector On/Off Turning on the Projector Remove the lens cap.(Illustration #1) Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue.(Illustration #2) Turn on your source (computer, notebook, video player ,etc.).
Turning the projector off To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.
Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise the image: Press the elevator foot release. (Illustration #1) Raise the image to the desired height angle (Illustration #2), then release the button to lock the elevator foot into position.
How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 74"...
Page 22
Screen size Desired (Min zoom) Distance Diagonal <A> (inch) W (cm) x H (cm) <B> 82 x 46 109 x 61 137 x 77 164 x 92 191 x 108 219 x 123 246 x 138 273 x 154 328 x 184 383 x 215 437 x 246 492 x 277...
How to get a preferred image size by adjusting distance and zoom 2.4 m The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 60" set the projector at a distance 2.0 m and 2.4 m from the screen and adjust the zoom level accordingly.
Page 24
Desired Image Size Diagonal (inch) W (cm) x H (cm) <A> 66 x 37 89 x 50 111 x 62 133 x 75 155 x 87 177 x 100 199 x 112 221 x 125 266 x 149 332 x 187 398 x 224 443 x 249 553x 311...
The new settings will be saved automatically upon exiting the menu. Push the menu button anytime to exit the menu and return to the Acer welcome screen.
Acer eView Management Acer eTimer Management Acer ePower Management Acer Empowering Key provide three Acer unique functions, they are "Acer eView Management", "Acer eTimer Management" and "Acer ePower Management" respectively. Press " key for more than one second to launch the Onscreen display main menu to modify its function.
Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control or control panel.
Color Display Mode There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation with higher brightness. • Standard: For common environment. • Movie: For brighter and general movie/video/photo playing. •...
Page 29
Advanced Sharpeness Adjusts the sharpness of the image. • Press • Press Brilliant Color Produces an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life images. This feature is "On" by default. Dynamic Black This feature enables the projector to automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail.
Image Projection mode • Front: The factory default setting. • Rear: Reverses the image so you can project from behind a translucent screen. Projection Location • Auto: Automatically adjusts projection location of image. • Desktop: Select this function when the projector is placed on the desk.
Page 31
H. Position • Press (Horizontal • position) Press V. Position • Press (Vertical position) • Press Frequency "Frequency" changes the projector's refresh rate to match the frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments.
Management ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector.
Page 33
Security Security This projector provides a useful security function for the administrator to manage usage of the projector . Press to change the "Security" setting. If the security function is enabled, your must enter the "Administrator Password" first before changing the security settings. •...
Page 34
Administrator Password is. • If losing this security card and number, please contact with an Acer service center. Auto Screen Default is "On", the down/up move of electronic screen will be related with power on/off of Projector.
Audio Volume • Press • Press • Mute Choose "On" to mute the volume. • Choose "Off" to restore the volume. • Power On/Off Volume Select this function to adjust the notification volume when turning the projector on/off. • Alarm Volume Select this function to adjust the volume of any warning notifications.
Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem No image appears • onscreen •...
Page 38
Partial, scrolling • or incorrectly displayed image • (For notebooks) • The screen of the • notebook computer is not displaying your presentation • Image is unstable • or flickering • Image has vertical • flickering bar • Image is out of •...
Image is too small • or too large • • Image has slanted • sides • Image is reversed • Problems with the Projector Condition The projector stops responding to all controls Lamp burns out or makes a popping sound Adjust the zoom ring on the top of the projector.
OSD Messages Condition Message Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum lifetime.
Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!"...
Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling.
Page 44
Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Smaller Washer Large Washer Projector Bracket Supports projector and allows - for adjustments Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution.
Page 45
Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models Screw Type B Diameter (mm) H7531D SCREW SPEC. M3 x 25 mm Tightening Screw Allen Key Allen Key Tightening Screw...
Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system Resolution Computer compatibility Video compatibility Aspect ratio Displayable colors Projection lens Projection screen size (diagonal) Projection distance...
Page 47
Standard package contents * Design and specifications are subject to change without notice. • AC power cord x1 • VGA cable x1 • Composite video cable x1 • Remote control x1 • Batteries x2 (for remote control) • User's Guide (CD-ROM) x1 •...
Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification...
Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw And, Acer Europe SA Via Cantonale, Centro Galleria 2 6928 Manno Switzerland Hereby declare that: Product:...
Page 55
-. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2010. _______________________________ Easy Lai /Manager Regulation Center, Acer Inc. Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan Aug. 1, 2010...
Page 56
Model Number: Machine Type: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: Acer America Corporation 333 West San Carlos St., San Jose DLP Projector M1P0003 H7531D series Acer America Corporation 333 West San Carlos St.