Husqvarna 555 Workshop Manual page 58

7. Remove the switch (A) from the connection plate
(B). Disconnect the wire (C) from the connection
plate. Disconnect the handle wire (D) from the
connection plate. Remove the connection plate (B).
Disconnect the stator wire (E) and the carburetor
wire (F) from the wire (G). Disconnect the ground
cable (H) from the handle.
G
E
H
58 - Repair instructions
C
B
A
D
F
8. Disconnect the wires and pull out the wires from the
handle. Be careful when you pull the wire through
the handle.
9. Pull the wire up through the carburetor bottom plate.
10. Remove the 2 screws and the bracket.
1540 - 001 -