Page 1
Gebrauchs- und Bedienungsanleitung Treppenpodest TP 1 Use and Operating Instructions Staircase platform TP1 Manuel d‘utilisation et d‘installation Plateforme d’escalier TP1 Instrucciones de uso y manejo Plataforma para escaleras TP1 Istruzioni d‘uso Pianerottolo TP1 Gebruiks- en bedieningshandleiding Trappodium TP1 Art.-Nr. 9940-xxx...
B = 22.44“ 29.53“ C = 2.36“ 4. Scope of delivery 1 x Staircase platform TP1 1 x Use and operating instructions The staircase platform is delivered completely assembled; no actions are necessary for assembly. Check that the contents are complete and check for any possible transport damage before use.
Setting up the hinged step / stepladder 4. Any HAILO hinged step with safety rail (min. 60 cm high) or a HAILO stepladder with a maximum of 4 steps can be set up in the middle on the staircase platform so the steps can be climbed from above.
The staircase platform is only intended for situations, persons can be injured and use with a HAILO hinged step or a objects damaged. HAILO stepladder with a maximum of 4 steps.
Page 7
When setting up the staircase platform, pay attention to the 6.3 Setting up the staircase platform possible risk of collision e.g. with people, vehicles or doors. Lock doors (but not emergency exits) and windows in the work- Pay attention to the complete and secured ing area, wherever possible.
7. Maintenance / preventive maintenance Care and maintenance of the staircase platform should insure its proper functioning. The staircase platform must be inspected regularly for damage. The functioning of moving parts must be ensured. Repairs to the staircase platform must be made by a qualified person and in compliance with the manufacturer’s instructions.
Henrys-Stores Daimlerstr. 8 35708 Haiger, Germany • +49 (0) 2773 82-0 www.ladders@henrys-stores.com +49 (0) 2773 82-1239 You can obtain additional information about services and Tel: 07743 790436 replacement parts from our customer service. E-Mail: info @ hailo.de www.hailo.de...
Need help?
Do you have a question about the TP1 and is the answer not in the manual?
Questions and answers