Eagle 202AKR Series Operation Manual page 13

Hand brake for parking
The hand brake is used for parking. The hand brake
pedal should be engaged into parking position
whenever the vehicle is left unattended: pull up the
hand brake to the end position in order to park the
vehicle completely. This operation will make the
vehicle stay in parking position when this vehicle is
unattended.
WARNING!
Do not drive the vehicle when the hand brake is
engaged! Always check and release the hand brake before driving. Failed to do
this will cause motor burn.
How to engage and disengage the parking brake?
To engage the parking brake, pull up the hand brake lever to the end;
To disengage the parking brake, pull up the hand brake lever to the end and then
press down the button on the top of the brake lever, with the button being pressed down,
—13—