Advertisement
If using an iOS Hand-Held Device:
1. Select the Settings icon.
2. Select Options, then select
FlexNet. FieldLogic scans for
the device and then displays
available devices. The list
refreshes automatically.
3. A permission pop-up window
displays. Select OK.
4. Select your CommandLink II
(CLxxxxxxxx) from the list of
available Bluetooth devices.
5. Select your CommandLink II
and then select the information
symbol.
6. FieldLogic connects to the
CommandLink II and displays a
success message.
7. Select Close to return to the Options screen.
8. Select the back arrow to return to the FieldLogic main
screen.
If using a PC:
1. Power up the CommandLink II.
2. Select the Bluetooth icon on your computer's desktop
or from the Start menu.
3. From the Bluetooth Devices pane, select Add a
device.
4. Your computer searches for devices to add.
5. Select the icon containing the CommandLink II ID
number (CLxxxxxxxx).
Note: If two numbers appear, make sure you select CLxxxxxxxx.
Do not select CLxxxxxxxx_BLE.
6. Select Next.
7. Your computer confirms the successful addition of the
CommandLink II.
8. Select Close to continue.
9. Start FieldLogic Tools. From the main screen, select
Tools and select Options.
10. Select the FlexNet Settings expander and select
CommandLink from the Communication Device
drop-down list. Select your device from the Device
name drop-down list.
11. Select Get Status.
FieldLogic Tools connects with the CommandLink II
and displays a success message.
12. Select OK to return to the Options screen.
13. Select OK to return to the Connect screen.
Attach a Strap to the CommandLink II
To attach a strap, slide it in between the slots on the sides of
the unit.
Advertisement
