Advertisement
If using a Windows Mobile Hand-Held Device:
1. Select Start, then Settings.
2. Select Connections, then select
Bluetooth COM.
Power on the CommandLink II if
it is off.
3. Select Discover Devices.
A list of all the Bluetooth enabled
devices in range is generated and displayed.
If your CommandLink II does not appear in the list,
make sure that it is powered on. If it is powered on,
power cycle it and select Discover Devices again and
repeat this step.
4. Select your
CommandLink II from
the list and select
Connect.
5. If you are prompted to
Set the Bluetooth PIN,
enter 0000 and select
OK.
6. Select OK to exit.
7. Select X in the lower right corner to exit.
8. Select FieldLogic Tools from the Start menu.
9. From the FieldLogic
Tools main screen,
select Menu and select
Options.
10. Select the FlexNet
tab and select
CommandLink from
the Device type drop-
down list. Do not select
CLxxxxxxxx_BLE.
11. Select Get Status.
FieldLogic Tools
connects with the
CommandLink II and
displays a success
message.
12. Select OK.
13. Select OK again to return to the Connect screen.
If using an Android Device:
1. Select the Settings icon.
2. Select Options, then select FlexNet. FieldLogic
displays a list of available devices.
3. Select + to view the
system pairing screen.
4. Select your CommandLink II (CLxxxxxxxx) from the
list of available Bluetooth devices.
5. Select Pair. Your CommandLink II then displays in the
Paired Devices list.
6. Return to FieldLogic Tools.
7. Select the newly-paired CommandLink II in the list
and select the information symbol.
FieldLogic connects to the CommandLink II and
displays a success message.
8. Select Close.
9. Select the back arrow to return to the FieldLogic
main screen.
Advertisement
