Ebyte E104-BT12NSP User Manual page 12

Chengdu Ebyte Electronic Technology Co.,Ltd.
ADV Bearer: Broadcast forwarding connection.The two nodes can forward and forward broadcast messages
3.
based on broadcasts, and can act as relay.Our product works on this connection.
4. GATT Bearer: Used for nodes that can participate in MESH networks without ADVbearer capabilities, sending
and receiving proxy PDUs over GATT connections via proxy protocol with other nodes.
The types of devices that our company supports are provision and mesh, lPN.
Provision node: A special Node node that initiates the entire network.Also called Gateway.It adds unstructured devices to
the Mesh network.The Provision node provides provision data to the unallocated device, including netkey, appkey, and
the unicast address corresponding to each of the devices' elements.
Mesh Node: Our Mesh node is a combination of four characters: Node, Relay Node, Friend Node and Proxy
Node.convenient and quick to use.
4.1.3.1 Moule
There are many models in SIG MESH. Our E104-BT10 module has three addresses. Each one can be bound to more
than one model. HSL's model has three addresses because it needs to control three things: brightness, saturation, and
color temperature.
Model name
Config Server
Health Server
Health Client
Generic OnOff Server
Generic OnOff Client
Generic Level Server
Generic Level Client
Generic Default Transition Time Server
Generic Default Transition Time Client
Light Lightness Server
Light Lightness Setup Server
Light Lightness Client
Light HSL Server
Light HSL Setup Server
Light HSL Hue Server
Light HSL Saturation Server
Light HSL Client
VENDOR MODEL（pass-throug model ID）
Generic OnOff Server
Generic OnOff Client
Generic Level Server
Generic Level Client
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
Model ID
0000
0002
0003
1000
1001
1002
1003
1004
1005 Master Address
1300
1301
1302
1307
1308
130A
130B
1309
0001A8
1000
1001
Master Address+1
1002
1003
E104-BT12NSP User Manual
12