Open Date Thermocode 2 Series Setting Instructions Manual page 8

Ethernet & USB-B Board
Once all system variables are set for TCP/IP, turn off the printer and then re-start the printer. To ensure the
settings are configured correctly, before attempting to connect to the Ethernet.
Changing System Variables using Recovermode (Continued)
Refresh the setting from the Printer to check the System Variable, are correct.
Recovermode Communications
See the Recovermode Manual for the full details for setting up Communication Ports.
Highlight Connection, then right Click the mouse
Click on TCP/IP
(
Issue 1.03) 11 January 2010 Page No- 8 -