Open Date Thermocode 2 Series Setting Instructions Manual page 7

Ethernet & USB-B Board
Changing System Variables using Recovermode
Recovermode System variable you need to change.
Double Click on the required variable to be Edited.
Or highlight the variable. Right Click then click
On "Edit the value"
Enter the IP Address. Then Click on "Send"
Enter Default Gateway address. Then Click on "Send"
(Not required)
Enter Subnet Mask address. Then Click on "Send"
(
Issue 1.03)
IPADDR 0
IPGW 0 (not required)
IPMASK 0
11 January 2010 Page No- 7 -