Vgs-1 Optional Voice Guide & Storage Unit - Kenwood TK-7360H Instruction Manual

VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
When using the optional VGS-1 voice guide & storage unit, you gain access to the voice recorder and
voice announcement functions. Ask your dealer for details.
V R
OICE ECORDER
The voice recorder provides you with an auto recorder to record your conversations and a voice memo
function to create voice memos.
■ Auto Recording
If activated, the auto recording function will continuously record all transmitted and received
signals. The recording storage area retains 30 seconds of recording, so all transmitted and
received signals are simultaneously recorded and erased, leaving only the last 30 seconds of
recording in memory.
• The
is activated.
■ Voice Memos
You can record a voice memo for later playback.
1 Press the key programmed as Voice Memo or press and hold the key programmed as
Playback for 1 second.
• The duration of recording memory will appear on the display and begin counting
down.
2 Speak into the microphone to record your voice memo.
3 Press the S, ■, or
memory.
• If the memory becomes full, recording will stop automatically and store the voice
memo to memory.
■ Auto Reply Message
You can set the transceiver to automatically respond to Individual Calls.
1 Press the key programmed as Auto Reply Message.
• "AUTO REPLY" momentarily appears on the display.
2 When you receive an Individual Call, Auto Reply will begin after waiting for 3 seconds, the
transceiver will send an automatic response to the caller, and "GREETING" appears on the
display
• If you are available to receive the call, press any key to cancel the auto
response.
• If there is a channel available on your transceiver for recording, "I am not
available. Leave your Message." will be sent to the caller. The caller can then
leave a recorded message on your transceiver which you can later recall and
listen to. When a message is stored on your transceiver, "MSG RCVD" appears
on the display.
• If there is no channel available on your transceiver for recording, "I am not
available" will be sent to the caller and "MEM FULL" appears on the display.
icon appears on the display when the Auto Recording function
key to end the recording at any time and store it into the transceiver
19