Dtmf Calls - Kenwood TK-7360H Instruction Manual

Note: To make DTMF calls, you must use an optional microphone with a DTMF keypad.
M D
ANUAL IALING
1 Press and hold the PTT switch.
2 Enter the desired digits using the keypad.
• If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTT
switch to transmit; you can make the call simply by pressing the keys.
A
UTODIAL
Autodial allows you to quickly call DTMF numbers that have been programmed onto your transceiver.
1 Press the key programmed as Autodial.
2 Press / (if the key assignment list selection is configured as "Enabled") or <B/C> to select an
autodial list number.
• You can also enter a number from 01 ~ 16 directly using the keypad.
3 Press the PTT switch to make the call.
■ Storing an Autodial Entry
1 Press the key programmed as Autodial Programming.
2 Press / (if the key assignment list selection is configured as "Enabled") or <B/C> to select
a memory location number.
3 Press S to enter a name for the list number.
4 Press / to select a digit.
5 Press C> to accept the entered digit and move the cursor to the right.
• Press A or # to delete an incorrect digit. Press and hold A or # to delete all
digits.
6 Repeat steps 4 and 5 to enter the entire name.
7 Press S to accept the name and enter a number.
8 Press / to select a digit.
• You can also enter digits directly using the keypad.
9 Press C> to accept the entered digit and move the cursor to the right.
• Press A or # to delete an incorrect digit. Press and hold A or # to delete all
digits.
10 Repeat steps 8 and 9 to enter the entire number.
11 Press S to accept the number and store the entry.

DTMF CALLS

9