Answering System Settings - Panasonic KX-TGD620 Series Operating Instructions Manual

R You can either hang up, or enter your
remote access code again and begin
remote operation (page 41).

Answering system settings

Call screening
While a caller is leaving a message, you can
listen to the call through the handset's
speaker. To adjust the speaker volume, press
MDN or MCN repeatedly. You can answer the call
by pressing M N on the handset. Call
screening can be set for each handset. The
default setting is "On".
1
MMENUN#310
2
MbN: Select the desired setting. a MOKN
a MOFFN
Number of rings before the unit
answers a call
You can change the number of times the
phone rings "Number of Rings" before the
unit answers a call. You can select 2 to 9
rings, or "Auto".
The default setting is "5 Rings".
"Auto": The unit's answering system answers
at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 42), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
1
MMENUN#211
2
MbN: Select the desired setting. a MOKN
a MOFFN
Caller's recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is "3 Minutes".
1
MMENUN#305
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
KX-TGD62xE(en)_0319_ver023.pdf 43
Answering System
2
MbN: Select the desired setting. a MOKN
a MOFFN
Selecting "Greeting Only"
You can select "Greeting Only" which sets
the unit to announce a greeting message to
callers but not record messages.
Select "Greeting Only" in step 2 on
"Caller's recording time", page 43.
Note:
R When you select "Greeting Only":
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 38).
43
2018/03/19 10:02:50