Nuisance Call Block; Storing Unwanted Callers - Panasonic KX-TGD620 Series Operating Instructions Manual

Nuisance Call Block

Nuisance Call Block
You can press the MCALL BLOCKN button in
the following situations to disconnect the
current call and add a phone number to the
call block list:
– when an incoming call is being received
– when an incoming call is being recorded by
the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
1
Press MCALL BLOCKN under the
situations shown above.
2
Confirm the call block number and press
MYESN.
R The call block number is stored in the
call block list, "Caller Blocked" is
displayed, and then the call is
disconnected.
Note:
R If the call has no phone number, the call is
blocked but it is not stored in the call block
list.
R The call block feature is not available for
intercom calls or calls received by call
waiting.
R Blocked calls are logged in the caller list.

Storing unwanted callers

The unit can block calls by storing the desired
items in the call block list beforehand (Caller
ID subscribers only).
– "Single Number": The unit blocks calls
from specific phone numbers stored in the
call block list.
– "Range of Numbers": The unit blocks
calls that begin with a number stored in the
call block list, such as a toll-free phone
number prefix or certain area codes.
– "Withheld": The unit blocks calls that
have no phone number.
However, this option may not be available in
the following situtions:
– If the caller dials from an area which does
not provide a Caller ID service.
20
KX-TGD62xE(en)_0319_ver023.pdf 20
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
– International calls.
Single phone numbers and ranges of numbers
can be stored in the call block list up to 50
items in total.
Blocking unwanted callers:
When a call is received, the unit does not ring
while the caller is being identified.
If the caller's phone number matches an entry
in the call block list, the unit emits no sound to
the caller, and disconnects the call.
Storing a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block list.
Adding call blocked numbers from
the caller list
1
MCN CID
2
MbN: Select the desired entry to be
blocked.
3
MCALL BLOCKN
4
MbN: "Yes" a MOKN a MOFFN
Adding call blocked numbers
manually
1
MCALL BLOCKN
2
MbN: "Single Number" a MOKN
3
MMENUN a MbN: "Add" a MOKN
4
Enter the phone number (24 digits max.).
a MOKN a MOFFN
Storing a range of number
1
MCALL BLOCKN
2
MbN: "Range of Numbers" a MOKN
3
MMENUN a MbN: "Add" a MOKN
4
Enter the desired number (2-8 digits). a
MOKN a MOFFN
2018/03/19 10:02:49