Canon EF-9 Service Manual page 27

1. Rear Cover
1) Remove the screw and take off the rear
cover.
Screw Rear cover
Figure 3-2-2
Note: Before performing an operation
check on the envelope feeder with
the rear cover removed, be sure to
either hold the bottom of the PCB
with your hand or tape it to the
frame.
2. Front Cover
1) Remove the screw and take off the front
cover.
Screw Front cover
Figure 3-2-3
3. Lower Cover
1) Remove the rear and front covers.
2) Remove the 2 screws and take off the
lower cover.
Screws Lower cover
Figure 3-2-4
4. Upper Cover
1) Remove the rear and front covers.
2) Remove the screw.
Screw
Figure 3-2-5
CHAPTER 3
3 - 3