Wall Mounting Installation Preparation; Removing The Base Stand; Wall Mounting - AG Neovo HX-24E User Manual

PRODUCT DESCRIPTION

1.2 Wall Mounting Installation Preparation

1.2.1

Wall Mounting

1
Remove the base stand.
See procedures below.
2
Wall mount the LCD display.
Screw the mounting bracket to the VESA holes at
the rear of the LCD display.
1.2.2

Removing the Base Stand

1 Lay the LCD display
face down on a flat
even surface.
2 Remove the four
screws securing the
base stand from the
LCD display.
3 Detach the base
stand.
4 Lock four screws
back.
100mm
100mm
75mm
Note:
To protect the glass panel, place a
towel or soft cloth before laying the
LCD display down.
75mm
Note:
Take measures to prevent the
LCD display from falling down
and lessen possible injury and
damage to the display in case of
earthquakes or other disasters.
♦ Use only the 75 x 75 mm and
100 x 100 mm wall mount kit
recommended by AG Neovo.
♦ Secure the LCD display on a
solid wall strong enough to bear
its weight.
6