Table of Contents
Advertisement
CHAPTER 3: USING THE LCD DISPLAY
3.1 Turning on the Power
1
Plug the power cord to a power outlet or power supply.
2
Touch the POWER button to turn the LCD display on.
The LED indicator turns GREEN.
When the LCD display is turned on, touch the POWER
button to turn off the LCD display.
The LED indicator turns off.
3.2 Selecting the Input Source Signal
Touch the
button to select the input source signal.
POWER button
LED indicator
SOURCE button
Note:
♦
Notes:
♦
♦
♦
15
The LCD display still consumes
power as long as the power
cord is connected to the power
outlet. Disconnect the power
cord to completely cut off
power.
After selecting an input source
signal, the input source signal
message appears on the
screen briefly.
For example, CVBS is selected
the following message is
displayed.
C V B S
I N P U T
If the selected input source
signal is not connected to the
LCD display or is turned off, the
no signal message is displayed
on the screen.
N O
S I G N A L
If the resolution or the graphics
card of the connected computer
is set too high, the input out of
range message is displayed.
I N P U T S I G N A L
O U T O F R A N G E
Advertisement
Table of Contents
