Boot Options Menu - Acer Veriton Z2610G Service Manual

Boot Options menu

Field
Boot Priority Order
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
5th Boot Device
EFI Device Priority
Hard Disk Priority
Optical Disc Drive Priority
Removable Device Priority
Network Device Priority
Quiet Boot
Halt On
Veriton Z2610G/Z2611G/Z2620G/Z2621G AIO Computer Service Guide
Description
Displays the device assigned to the specified boot sequence. The Setup Utility
attempts to boot the operating system in this order. By default, the computer searches
for boot devices in the following order:
• EFI environment
• Hard disk
• Optical drive (CD/DVD)
• Removable device
• Network boot (LAN)
Press Enter to set the boot priority for the EFI (Extensible Firmware Interface)
environment.
Press Enter to set the boot priority for the hard drive.
Press Enter to set the boot priority for the optical drive.
Press Enter to set the boot priority for a removable USB drive.
Press Enter to set the boot priority for a network boot.
When enabled, BIOS will show a full screen logo when booting; if
disabled, BIOS will show the diagnostic POST screen when booting.
Determines whether the system will stop for an error during the POST.
Options include:
• All, but Keyboard – If a keyboard error is detected, BIOS will pause
the system.
• All Errors –- Any error detected will pause the system.
• No Errors – BIOS will ignore any errors detected during POST
Value
Disabled
Enabled
All, But
Keyboard
All Errors
No Errors
21