Table of Contents
Advertisement
TURBO
This mode allows you to cool indoor air quickly in summer or warm it quickly in
winter.
1.
Press the "ON/OFF" button to turn on appliance.
2.
Confirm that either "COOL" or "HEAT" modes are selected as shown on the
LCD screen.
3.
Press the "TURBO" button, "TURBO" is shown on the LCD screen and an
addition fan speed bar is also displayed.
When the appliance is operating in AUTO, FAN or DRY modes the Turbo function is not available.
In turbo mode the fan is set to operate at the maximum output. Attempting to alter the fan speed
NOTE
during TURBO mode operation will cancel this mode and return the appliance to manual operation.
QUIET
This mode operates the appliance at it's quietest, ideal for when minimal indoor
noise levels are desired.
1.
Press the "ON/OFF" button to turn on appliance.
2.
Confirm that either "COOL" or "HEAT" modes are selected as shown on the
LCD screen.
3.
Press the "QUIET" button, "SILE" is shown on the LCD screen and a single
fan speed bar is also displayed.
Attempting to alter the fan speed during Quiet mode operation will cancel this mode and return
the appliance to manual operation.
NOTE
HEALTH (WI-FI)
When pressed 8 times in quick succession, this button activates and or resets the Wi-Fi module of the appliance.
The appliance will respond with a double beep to confirm Wi-Fi activation or reset.
For further details refer to the Wi-Fi Operation Manual, a copy of the manual may be downloaded from the Rinnai
web site: http://www.rinnai.com.au/cooling/
SLEEP MODE
1.
Press the "ON/OFF" button to turn on appliance.
2.
Set the desired mode, temperature and fan setting as per basic
operations.
3.
Press the "SLEEP" button, "SLEEP" is shown on the LCD screen:
For Cooling: Allows the set temperature to increase and decrease over
a 10 hour period at pre-set time intervals to maintain your comfort while
saving energy (see graph right).
For Heating: Allows the set temperature to decrease and increase over a
10 hour period at pre-set time intervals to maintain your comfort while saving
energy (see graph right).
Sleep mode is not available in FAN only mode.
The Delay Off Timer (see page 12) can be used in conjunction
NOTE
with SLEEP mode to turn off the air conditioner automatically.
4.
Pressing the "SLEEP" button again will cancel sleep mode, "SLEEP"
will no longer be shown on the LCD screen.
Rinnai
COOL
1°C
1°C
C°C
H°C
-1°C
-1°C
11
ADVANCED OPERATION
RUN
C
COOL
AUTO
TURBO
SPEED
Low
Medium
High
Turbo
RUN
C
COOL
SILE
SPEED
Quiet
RUN
RUN
C
COOL
SPEED
SPEED
SWING
LRSWING
SWING
POWERCON
SLEEP
SLEEP
iFEEL
H
ON
OFF
0
1
2
7
Sleep mode 1O hours
C°C = Set cooling temperature
H°C = Set heating temperature
0
1
2
7
Split AC OM
C
LRSWING
POWERCON
iFEEL
H
ON
OFF
10
10
Advertisement
Table of Contents
